[[email protected]]

what do u think of my system?

Headunit: Alpine CDA-9827
Front speakers: infinity 60.7cs component set (90 rms, 270 peak)
Back speakers: infinity 63.7i (75rms, 225 peak)
Highs amp: 4 channel Avionixx 800.4 running 4 guage amp kit
Subs: 2 MA Audio X2 12" subs (1500rms, 3000 peak each)
Enclosure: 4 cubic foot HDF ported box tuned to 32hz
Subwoofer Amp: Crossfire VR1000d runing on a 2 guage amp kit (planning on getting another 1000D)
Dynamat : dynaxorb behind speakers, dynamat door kit, dynamat in the rear hatch, and a dynamat trunk kit for the Area where the spare tire is(took out spare tire)

 

[nY1018]

avionixx?

 

[[email protected]]

4 Channel Class T Amplifier Specifications - All ratings @ 12.5v
Number of Channels - 4
RMS Power @4ohm <0.08% THD - 4x125
Avionixx 800.4

RMS Power @2ohm <0.5% THD - 4x200
RMS Power @Bridged 4ohm <0.5% THD - 2x400
Power Bandwidth (Rated Power -1db) - 15Hz - 30kHz
Frequncy Response (+0/-3db) - 5Hz - 40kHz
"A" weighted signal to niose ratio - >-90dba
Channel Seperation - >60db
Damping Factor - >100
Variable Input Level - 15OmV - 6v
Line Outputs - YES
Variable Low Pass Crossover Filter - 50Hz - 250Hz 18dB
Variable Subsonic Filter - 50Hz - 250Hz 18dB
Double Sided, 2Oz. copper clad, FR4 glass epoxy circuit board.
Overload Protection - YES
Short Circuit Protection - YES
Cross Wire Protection - YES
DC Off-Set Protection - YES
Thermal Protection - YES
Dimensions - Inches - 18 x 9 7/8 x 2 1/4
Weight - 13 Lb

 

[nY1018]

do u have pics of your system?

 

[eddiemoney]

I agree, pics would help, install means a lot in the quality of a system.

 

[[email protected]]

not yet, but im working on it.......can someone delete this thread? ill make another one when i get pics

 

[nY1018]

........when you actually get the system

 

[LaVaism]

The subwoofers he definatly has, he bought them from me.

 

[[email protected]]

haha i ordered some of it, most of it i have in my possesion, i could take pics of everything but its not all installed just the front speakers, subs, HU, dynamat on the license plate, and crossfire amp

 

[gottc?]

so how much of it currently works? and how much is just riding around with you?

 

[LaVaism]

Well I told him I would host the videos for him so here it is:

http://www.extremedigitalaudio.com/demo/

Now because I have been working with him for a couple weeks I can tell you his speakers are real and they are working. The system has the potiential to be great but still needs some work. Box design is all wrong the subwoofers require 3 cubic feet per 12" and he has two so it needs to be a 6 cubic feet box ported or a 3 cubic feet box sealed. I don't think he knows what loud really is just yet.

Amps wise I don't agree that crossfire is the best amp for the subwoofers, they can handle 3000 watts 1500 RMS. I am trying to tell him to pair them up with some MaAudio amps, or even an orion amp. Those subwoofers are pretty badass, the guy that does competitionw ith them had another guy with L7's look at those subs and just dropped out of the competition.